12 VOLT ELECTROWARMTH® BUNK WARMERS
Installs in Minutes!
Choose the size OF 12 VOLT BUNK WARMER
you need From this menu:


then click this button to order yours!
Simple to USE!
 
Automatic 12 Volt Bunk Warming Pad
Sleep Warm and Comfortable Without Idling the Engine.
Save Fuel and Engine Wear. If you want the best, be sure it says:
ElectroWarmth®
 
SLEEP WARM WITHOUT IDLING
Enjoy a great night's sleep anywhere you stop. 12 volt bunk warming pad goes "on the mattress" under you (heat rises). Plugs into the lighter socket. Pre-warms bunk and gets rid of dampness. Heat soothes and relaxes tired back and legs. Helps lull you to sleep. Keeps you warm all night without idling the engine. No more engine noise, vibration, or exhaust fumes.

Automatic Comfort Control thermostat regulates heat based upon the setting you select (1 - 7). It adjusts the heat in the bunk for any change in cab temperature. As the cab cools, it supplies just the right amount of extra heat to keep you comfortable.

Highly Efficient - the "on the mattress" system with automatic Comfort Control converts 98% of the battery power consumed to heat. Average current usage is about 3 amps. Similar to leaving a few clearance lights on. ElectroWarmth® Bunk Warmers do not cause battery or starting problems.

 
SAVE FUEL AND ENGINE WEAR
Save Fuel and Engine Wear - A typical diesel uses a gallon of fuel an hour when idling. With an ElectroWarmth® Bunk Warmer in place, there is no need to idle engine all night to keep warm. Also saves engine wear caused by prolonged idling. Pays for itself in fuel savings alone in less than a week. Most drivers consider the Bunk Warmer one of the best investments they have ever made. It is well worth the cost for the sleeping comfort, but it keeps saving you money night after night, year after year. Saves on motel bills also.

Well Proven in Trucking Fleets - ElectroWarmth® Bunk Warmers have proven themselves to be dependable, durable, and cost effective for fleets such as Schneider National, Star Transfer, TMC, Wal-Mart, and Werner, to name just a few. A better night's sleep keeps drivers more content and safe.

Avoid Law Violations - Some areas now have ordinances limiting idling.

 
HERE'S WHY TRUCKERS PREFER 12 VOLT ELECTROWARMTH® BUNK WARMERS:
The manufacturer developed the original "on the mattress" ElectroWarmth® Bed Warmer for home use in 1939, and built the first 12 volt Bunk Warming Pad for trucks 20 years later. The many years of manufacturing experience are important to assure you:

• A design with plenty of heat capacity

Quality construction and Proven Durability

• An established record in the 12 volt field and well proven in all types of vehicles all over North America and even in Siberia.

• One year limited warranty with fast factory service if ever needed.

• SATISFACTION GUARANTEED! 30 day money back policy.

These basic features are necessary to effectively warm the bunk and keep you comfortable:

• The on the mattress system puts all the heat in the bed. For maximum efficiency and comfort, the heat needs to be underneath you. Electric blankets are not as effective since they lose half the heat directly into the air.

• There has to be enough wattage (heat output) for fast warm-up in the coldest weather. ElectroWarmth® has the longest heat reserve available.

• Automatic Heat Regulation with a variety of settings. ElectroWarmth® comes equipped with the Comfort Control thermostat.

 
  An Explanation About Sizes:  

The width of the mattress determines the
size of 12 VOLT electrowarmth® Bedwarmer You need.

The model number specifies the width, for example the T30 is 30 inches wide. The bed warmer can be narrower, but not wider than the mattress. Narrow sizes can be used for one side of a larger bed. For example: a model T30 which fits mattress for a single sized bed can be used on one side of a queen size bed and the T36, which fits a twin sized mattress, can be used on one side of a king size bed. Models T54D and T60D are equipped with dual controls, one for each half of the bed.

12 volt bunk warmers measure 60" in length. They are complete with the automatic Comfort Control. This thermostat adjusts the bed warmth in response to any change in temperature. Select the warmth you enjoy and it will automatically maintain this comfort level. If the room cools, it responds with just the right amount of heat to keep you comfortable. If the cab warms up, it cuts the heat back accordingly. There is no heat under the pillow.

 
  An Explanation About MODEL NUMBERS:  

The model number of an ElectroWarmth® 12 Volt Bunk Warmer consists of two or three parts:

• A letter indicating the power source needed. "T" models are powered by 12 volt current.

• A number indicating the width. For example with the model T30, "30" indicates that the bedwarmer is 30 inches wide.

• In the larger models, a "D" indicates dual Comfort Control units, one for each side of the bunk warmer.

 
TECHNICAL INFORMATION AND SPECIFICATIONS
The rated volts, watts, and amperage are shown in the table below. The Comfort Control thermostat cycles the warmth on and off at short intervals. It pulls full rated amperage only when cycled on. The amount of time it is cycled on versus off depends on the Comfort Control setting and room temperature. Experience has shown that on the average, it is cycled on less than 50% of the time. Since rated amperage listed is maximum if it is on 100% of the time, the average load on the battery system is 50% or less of rated amperage (reports of battery problems have been negligible over the 30 years we have offered the 12 volt products).
Model # DESCRIPTION DIMENSIONS VOLTS RATED WATTS MAX AMPS*
T24 Bunk 24 x 60 12 50 4.2
T30 Single 30 x 60 12 56 4.6
T36 Twin 36 x 60 12 75 6.3
T42 3/4 Double 42 x 60 12 75 6.3
T54 Double 54 x 60 12 96 8.0
T54D Double Dual Control 54 x 60 12 97 8.1
T60 Queen 60 x 60 12 111 9.2
T60D Queen Dual Control 60 x 60 12 111 9.3

* Note: Wattage and amperage shown for dual control models is total. Each side is rated 1/2 the total shown.
 
ACTUAL CUSTOMER TESTIMONIALS:
READ WHAT USERS HAVE TO SAY ABOUT ELECTROWARMTH® BUNK WARMERS
The following testimonials were entirely voluntary, and no compensation was given in return.
Read what some enthusiastic users have to say about the "on mattress" bunk warmer.

"Money well spent, I figure it paid for itself the first 6 nights I had it! I am very well pleased with it and recommend it to other drivers"

RC: Florida


"In a short time I noticed and appreciate the fact that my bunk is no longer damp. I have a back condition, and since I have the warmer, I am not stiff and sore when I crawl out of the bunk."

JWK: Pennsylvania


"This bunk warmer is the greatest thing since television!"

RS: California


"It sure is nice to warm the bunk up in the truck on a cold night, then crawl in. It also relieves backaches."

DB: Kansas


"I am well pleased with my bunk warmer. It uses very little wattage to operate in cold weather."

RWJ: Indiana


"GREAT! Saves money, no noise from the truck motor. Keeps dampness out of sleeper, and you get a better night's sleep."

IL: Canada


"I have used your product for the past 12 years. The same warmer has lasted all that time and is still working!"

RL: Arizona


"Helps me get my tripmaster bonus because I idle my tractor less. The warmer paid for itself in 2 weeks."

BB: Wisconsin


"A pleasure to get into a warm bunk, sleep warm, and awaken rested without a chill. A minimum of current for maximum comfort."

LHM: Pennsylvania

Choose the size OF 12 VOLT BUNK WARMER
you need From this menu:



then click this button to order yours!

ElectroWarmth® 115 VOLT Bedwarmers Are UL Approved!

Fitted Bedwarmers | 12 Volt Bunk Warmers For Big Rig and RV Models | Massage Table Warmers
Doctor Recommended | Wall Street Journal Article | Article on E.M.F. | Technical Information
Frequently Asked Questions | Testimonials | Home Page | Contact Us